The Classic RO/DI system provides up to 100 GPD of economically filtered reverse osmosis water, removing harmful substances such as heavy metal ions and total dissolved solids from tap water. The most economical RO (per month expense calculation) system in India.
Features:
- Includes 1 Micron Pre-filter Cartridge (Sediment), Solid Carbon Block Cartridge, 100 GPD TFC Membrane Cartridge and Color Changing Resin (Deionization)
- Manual flush valve allows user to increase membrane life
- Clear micron cartridge housing makes it easy to view when cartridge should be replaced
- Wrenches make it easy to access the cartridge and membrane
- housings - Garden hose adapter make it easy to connect to a faucet
- 1/4 inch Buddy-Fit Press Fit Connectors simplify plumbing
- 0-160 PSI gauge provides a pressure reading of the supply water
- 10 ft. x 1/4 inch of each blue, yellow and red polyethylene tubing helps with plumbing setup
- Built-in wall mount bracket allows the unit to be hung and secured in place
Product Specifications:
Output - 100 GPD.
Dimensions with bracket - 16.5" wide x 8.5" deep x 18" high.
Weight 14 lbs.
Minimum water pressure - 30 PSI.
Suggested water pressure - 65 PSI to Maximum water pressure: 80 PSI
Optimal Water Temperature - 77°F (25°C).
Notes:
These notes are written by aquascaping.in with many years of experience on selling Aquatic Life USA products and long term feedback from the customers, this is at all useful for you might save you time and efforts and also increase the life of your RO System or give you a better performance:
Case 1:
There is lot of sedimentation in the water such as brown particles which is usually due to high iron in water, or dust which is due to contamination in water
-
In such case we have faced issue and feedback from mainly Kolkata (West Bengal) and well as some other parts of India that there is high sedimentation due to Iron, it it highly recommended to install a Pre Filter Single Clear 10-Inch Canister w/Tubing, (only if you are using all 4 stages of the classic system i.e. making 0 TDS, otherwise you do not need to purchase this) this will pre filter all the sediments but also is very economical compared to changing the cartridge of the system, hence increasing the light of your RO system as well as adding another layer of filtration. This is not needed if you water is not high in iron or dust.
Case 2:
Some hobbyists want to remove remove Chloramine & Chlorine directly from water via RO system, specially hobbyist who have sensitive fishes / shrimps:
Case 3:
I have very high TDS water, above 1800 TDS, will this system work ?
-
We have successfully installed RO systems in areas such as Chennai and many parts of Gujrat which have very high TDS sometimes even above > 2000 TDS, our experience has been good, but you should be mentally prepared that the the membrane life will shorten. Usually in Chennai membrane lasts for about 2-2.5 years without high impact. Now for 0 TDS we definitely mentally prepare the client for higher Di resin usage compared to any other areas in India, but you will surely get 0 TDS water consistently.
Case 4:
I want to buy the classic 100 GPD system but i don't want 0 TDS ?
- Thats wonderful, you can remove the Di cartridge and the system will become a 3 stage, in many cases we do not require 0 TDS water but we install this system due to the ease of use and very economical running cost, therefore we remove the di cartridge and install additional pre-filter OR we leave it blank OR we remove the resin from the Di cartridge and add any additives if we want to remove other elements from the water, for example high silica / silicates.
Download the 100 GPD Instruction Manual HERE
